Listing note. Listings come from public job feeds and can change or expire—check the original source and eligibility requirements before applying.

All listings

Technology

Senior Flight Controls Engineer

Odys

Ashby
WhatsApp
Location
Long Beach CA, United States
Type
FullTime
Salary
Salary not specified
Posted
17 Nov 2026
ABOUT ODYS At Odys, we’re mobilizing power, with Hybrid Power Systems developed for aerospace and in-demand everywhere. It’s the kind of mission diversity that demands a fresh way of thinking. We began with an early bet on hybrid, when the mobility industry was focused on batteries. We designed, tested, and validated our first 1 MW high-speed generator in 12 months. And then we pushed further, developing systems with greater power density in less time. Today, our Hybrid Power Systems offer outputs ranging from 20 kW to 4 MW, with applications in the air or on the ground. One of those applications is Laila, an unmanned drone designed for critical logistics and defense missions. With its 100 kW-class onboard Hybrid Power System, Laila can support medical cold-chain transport or serve as an aerial platform for counter-UAS measures. The market interest has been overwhelming: Over 30 inbound requests from leading US and global manufacturers, and 14+ DoD contracts. Our team comes from deep tech and aerospace, with backgrounds spanning drone and aircraft development, high-volume production, and electrified mobility. We operate with urgency and ownership at every level. We validated high-s
ABOUT ODYS At Odys, we’re mobilizing power, with Hybrid Power Systems developed for aerospace and in-demand everywhere. It’s the kind of mission diversity that demands a fresh way of thinking. We began with an early bet on hybrid, when the mobility industry was focused on batteries. We designed, tested, and validated our first 1 MW high-speed generator in 12 months. And then we pushed further, developing systems with greater power density in less time. Today, our Hybrid Power Systems offer outputs ranging from 20 kW to 4 MW, with applications in the air or on the ground. One of those applications is Laila, an unmanned drone designed for critical logistics and defense missions. With its 100 kW-class onboard Hybrid Power System, Laila can support medical cold-chain transport or serve as an aerial platform for counter-UAS measures. The market interest has been overwhelming: Over 30 inbound requests from leading US and global manufacturers, and 14+ DoD contracts. Our team comes from deep tech and aerospace, with backgrounds spanning drone and aircraft development, high-volume production, and electrified mobility. We operate with urgency and ownership at every level. We validated high-speed generator technology faster than our peers, not because we skipped steps, but because we've been doing this long enough to know which ones matter most. Creating the future of power, in the air and on the ground, is a challenge we’ve been training our entire lives for. If that sounds like you, this is the opportunity you’ve been waiting for. ABOUT THE ROLE As a Senior Flight Controls Engineer, you will play a pivotal role in shaping the behavior of our UAVs, from initial concept to real-world flight. Our Flight Dynamics and Controls team is responsible for designing, implementing, and validating control algorithms that enable precise, stable, and agile flight. You will work closely with our aerodynamics, mechanical, software, and flight test teams to ensure seamless integration and execution of control strategies. This role offers the opportunity to directly impact the way our UAVs fly, through hands-on development, real-time testing, and flight validation. RESPONSIBILITIES CONTROL LAWS AND AUTOPILOT - Design, implement, and tune flight control laws for large VTOL UAVs across hover, transition, and wingborne flight, including stability/control augmentation, mode logic, and transition scheduling. - Develop guidance, navigation, and state-estimation functions around inner-loop control laws within the agreed autopilot architecture. - Define control-system requirements for stability margins, handling qualities, and performance; demonstrate compliance across the flight envelope. - Establish failure detection, reconfiguration, and fault response for sensor, actuator, and power failures; collaborate with systems and safety engineers on redundancy management. - Lead technical reviews of control laws and address follow-up actions. IMPLEMENTATION AND FLIGHT SOFTWARE - Develop control laws using a model-based workflow with requirements, traceability, and reviews suitable for safety-critical software. - Implement control laws for real-time embedded execution, ensuring that airborne software aligns with the design. MODELING AND SIMULATION - Build and refine simulations to develop and verify control laws, including effects from airframe, propulsion, actuators, and sensors. - Plan and execute model-in-the-loop (MIL) and software-in-the-loop (SIL) simulations to identify issues prior to hardware and flight testing. - Perform system identification on ground and flight data to update models, ensuring simulation accuracy. AIRCRAFT INTEGRATION - Collaborate with aerodynamics, mechanical design, avionics, and flight software teams to iterate control strategies as the vehicle and its interfaces evolve. - Define control-system interfaces to sensors, actuators, and flight computers, addressing timing, latency, redundancy, and fault response. TEST AND FLIGHT VALIDATION - Plan and execute hardware-in-the-loop (HIL), ground-test, and flight-test activities to validate control-system performance. - Create test procedures and flight-test cards; analyze simulation and flight data to verify requirements and inform design iterations. - Work with the flight test team to ensure campaign safety and data usability for control system improvements. - Prepare control-law design and verification data for technical reviews (internal and external). - Mentor less experienced engineers in analysis, implementation, and data review. REQUIRED QUALIFICATIONS - Bachelor’s degree in Aerospace Engineering, Mechanical Engineering, Electrical Engineering, or related field, with depth in flight dynamics and control (Master’s/Ph.D. welcome but not required if experience is met). - 5–12 years developing flight control systems for crewed aircraft, UAVs, or flight vehicles, including leading control laws through flight test on at least one program. - Strong foundation in flight dynamics and control theory (classical and modern control-law design, gain scheduling, stability-margin analysis). - Experience with fly-by-wire or full-authority autopilot architectures, including mode logic and redundancy. - Solid understanding of guidance, navigation, and state estimation (Kalman filtering, INS/GNSS sensor fusion). - Proficiency in MATLAB/Simulink (control-law design/analysis) and C/C++ and Python (implementation, test tooling, data analysis). - Experience with real-time embedded control law implementation and debugging on HIL rigs. - Experience with MIL/SIL simulations and analyzing flight/test data to close design loop. - Experience leading technical reviews and mentoring engineers. - Clear communication skills with multidisciplinary engineering teams; ability to document design decisions and updates. PREFERRED QUALIFICATIONS - Experience with vertical takeoff and landing aircraft, especially transitions between powered lift and wingborne flight. - Familiarity with aircraft system identification tools (CIFER, SIDPAC, or equivalent). - Proficiency with flight-control analysis and optimization tools (e.g., CONDUIT). - Knowledge of Embention or other integrated UAV flight-computer/autopilot hardware. - Hands-on experience with HIL rigs and participation in flight-test campaigns, including test-card development and test safety planning. - Understanding of actuator dynamics, redundancy management, and sensor fusion. - Expertise in envelope protection, loss-of-control prevention, and contingency management for unmanned aircraft. - Experience with safety-critical development (DO-178C, DO-331) or flight control system certification (UAV or crewed-aircraft). - Familiarity with system safety processes (ARP4754B, ARP4761A—FHA, FMEA) as applied to flight controls. - GNSS-denied navigation or vision-aided state estimation experience. - RC, remote-pilot, or crewed-pilot experience.